NOWATCH X: Insert Time Disc and set the time

• How to insert a Time Disc into the NOWATCH case
• How to set the time on the Time Disc
• Time Disc battery

How to insert a Time Disc into the NOWATCH case

1. Locate the notch on the Time Disc
   On the edge of the time disc, there is a small notch near the top.
2. Align the notch with the opening in the case
   Inside the watch case, you’ll see a corresponding opening/slot at the top. The notch on the Time Disc must line up with this opening for the disc to sit correctly.

3. Lower the Time Disc gently into the case
   Once aligned, place the disc flat into the case. It should sit evenly and smoothly.

4. Do not force the disc
   If the disc doesn’t sit flush right away, remove it, realign the notch, and try again. When properly aligned, it should fit without any pressure.
5. Confirm it’s fully seated
   The disc should be level and secure before closing the case.

How to set the time on the Time Disc

Before inserting the disc, check whether the time is correct. You may need to adjust it after a time change (such as daylight saving time) or when traveling to a different time zone.

1. Remove the Time Disc from the case.

2. Gently pull out the small crown on the Time Disc.

3. Turn the crown to set the correct time.

4. Push the crown back in.

5. Insert the Time Disc into the case (see section above).

Time Disc battery

The NOWATCH X Time Disc has its own replaceable battery. It typically lasts 3–4 years.

• The Time Disc works independently from the app and the device’s tracking features.

• Time zone changes need to be adjusted manually using the disc crown (not in the app).

• Charging or wearing the device does not affect the disc’s timekeeping.