How to insert and remove NOWATCH X discs – NOWATCH Help

Changing discs on your NOWATCH X is a quick process. Learn how to insert and remove NOWATCH X discs safely, including the Time Disc.

How to insert the disc into your NOWATCH case

Do you own a Time Disc? Jump to that section.

Place the underside of the charger over the top of your disc to activate the magnet. (A)
Lower the disc into the case, making sure it sits perfectly aligned (B).
Slide the charger sideways to disengage the magnet (C). The metal discs have a larger metallic mass, resulting in a stronger magnetic force when using the underside of the charger.

Ensure the time is accurate - Double-check that the watch hands are set to the correct time. If they aren’t, follow the steps in this article to adjust the time.
Locate the notch on the Time Disc - On the edge of the time disc, there is a small notch near the top.
Align the notch with the opening in the case - Inside the watch case, you’ll see a corresponding opening/slot at the top. The notch on the Time Disc must line up with this opening for the disc to sit correctly.
Lower the Time Disc gently into the case - Once aligned, place the disc flat into the case. It should sit evenly and smoothly.
Do not force the disc - If the disc doesn’t sit flush right away, remove it, realign the notch, and try again. When properly aligned, it should fit without any pressure.
Confirm it’s fully seated - The disc should be level and secure before closing the case.

place disc.png